NFLstarJersey.com is a company specializing in online selling NFL jerseys cheap, NBA jerseys cheap, NHL jerseys cheap and MLB jerseys cheap and related products. We have our own factory. All of our jerseys are 100% stitched and sewn on, never screen printed so the quality is guaranteed. You can place order directly on our website for the jerseys you like. And then settle payments by ecpay or gspay or Western Union. We will follow up your order request and arrange EMS express. Normally it will take 7-10 days. You could track your order on EMS website with the EMS express numbers which we provide. And if you are a wholesaler, you could contact us by on-line customer service or mail and we will give you the best discount.
You may also like
Nice! I enjoyed the clip.
http://kansascity.craigslist.org/bks/1970090821.html
Many, but not all, of the “top marimba players” performed at the Marimba 2010 International Festival & Conference in late April in MN. For information, see www.marimba2010.org
It was a fantastic experience. Congratulations to Fernando Meza for making it all happen.
WM
Hello Folks-
I’m a percussionist of many years who lucked into a fine old Deagan model 330 “Stu-Dette” marimba, a tiny one for sure at 2.5 octaves.
The bars are in fantastic shape, I will probably replace the grommets too but the big issue was this: the resonators are cardboard and it was missing the tubes (broken off) for the low C# and D#.
I’m a fix it guy, I do repairs on all sorts of instruments so I thought this would be fun to tackle.
I found 2 cardboard tubes the right diameter, I cut some aluminum caps for the bottoms, and I found a formula online for measuring resonator length for each pitch. I even found some paint that closely matches the paint on the other tubes.
Got it all together….the two replaced resonators aren’t quite as resonant.
Is it the cap on the tube? Should it be brass? Should the insides of the tubes be painted to be more reflective (this I thought of after I glued the caps on so I could only paint about half of the inside)? Should I use PVC or something as a reso tube? Or, could my calculations be off?
My resonators measure 30.8cm for the C# and 27.6cm for the D#.
Any leads would be great!
thanks
mark in Philly